>Armored Vehicles Components
Armored Vehicles Components
Armored Vehicles Components include Armor Steel and Laser Cut Steel Panels.
KANAS can supply armor steel, ballistic glasses, Heavy Duty “E” rated tires, Camera system, intercom system, Codan Radios and all other components as mentioned on the left column.
Please click any option from left column to find more details.
If you need any further information regarding any of your requirement, please write to us at info[@]kanasgroup[.]com.
Hi Amps Alternator
KANAS supplies the hi-amps alternators on your specific requirement for various makes and models vehicles and vary desirable amps output. These alternators are made in USA.
Below is the 240 amp large case conversion kit for Toyota Landcruiser 200 series 4.5L diesel:
The kit also includes the plug-n-play adapter harness with the adjustable voltage feature so you can increase the charging voltage to 14.9 volts. This is very popular amongst our armored customers, as it allows for better efficiency from 24V transformers, ECMs, inverters and radio equipment. We also offer 1/0 gauge power cable that can be made up to your length specifications to make the installation quick and easy. Specification of parts used in alternators:
1. Stator – Stator specifically designed for high output from idle to maximum engine speed. All Truck Tough alternators are hot tested at 200 degrees Fahrenheit
2. Rectifier – Tough Truck Exclusive solid copper rectifier with high capacity diodes has two times the power handling and cooling capacity of OEM for reliability in high demand conditions
3. Rotor – Precision balanced rotor utilizing OEM alloy provides maximum output at all speeds with low vibration for long bearing life
4. Regulator – Heavy Duty Regulator with 100% OEM compatibility for easy installation and long life.
5. Bearings – Premium NTN bearings provide long life in high vibration and dirty environments where other bearings fail
6. Pulley – Truck Tough billet pulley to provide the best traction for your belt in any situation
7. Oversized output stud provides easy connection and excellent power conductivity Elite Series Alternators
Newly re-designed for 2013, the Elite series of high output alternators utilizes cutting edge 6 phase hairpin stator technology to create the most powerful overall output curves currently available in an automotive alternator. These units feature twin internal rectifier plates with finned heat sinks for excellent durability on daily driven vehicles. 12 massive press fit high amp diodes allow for incredible power handling, while precision balanced rotors and low electromagnetic harmonics result in excellent bearing life. You will not find a more powerful or more durable alternator anywhere!! Note: Customers with smaller than 6″ diameter crankshaft pulleys, or narrower than 6 groove drive belts should use the 250 amp model for best performance at idle and minimized belt slip.
If you have a question which has not been answered here, or you have other inquiries please email at 
or use our
contact us form.
FLATSOVER SYSTEM
Main differential characteristic of the “FLATSOVER Wheel and Tire Protection System” is that this is the only protection system available in the world market that can act directly attached to the hoop, without the need of a tire to work effectively in emergency situations.
Ballistic tests in accordance to International norms had been carried out and the "FLATS OVER SYSTEM” demonstrated a satisfactory behavior, without presenting significant changes to its original mechanical properties.
The Origin of Tire and Wheel Protection System
The product “ARMORING FOR PASSENGER CARS” was developed to provide ballistic protection and escaping conditions from risky sites for all occupants of the vehicle in emergency situations.
Over time, the number of companies acting in the installation of armoring vehicles market and the production of materials for armoring has increased significantly. This competitive situation triggered the development of a number of ballistic materials, which are lighter, more resistant, more flexible and with superior performance, among others advantages.
Studies revealed that wheels and tires that are made of high superficial hardness and/or high mechanical resistance materials, such as steel carbon fiber, and engineering plastics (Nylon, Teflon, etc) and other materials, have a serious risk of fractures. The basic components of the alloy wheels can fracture, after being submitted to impacts in pot-holes, which are, unfortunately very common, specially in the war zones, conflict or post conflict areas. These systems of protection are used world-wide, and extremely important for an armored vehicle to move from a risky site during an attack situation.
FLATSOVER SYSTEM is now the new demand of armoring industry and exact need of any armored vehicle. It will not fail in any risky situation.
The main differential of the "FLATSOVER Wheel and Tire Protection System", is that this is the only system available in world-wide market that can act directly in the paving of the road, without the need of the tire to have its effectiveness.
As it is made of a compact structure and high mechanical resistance, confectioned in polyurethane elastomer (rubber), it has particular characteristic positively related to the absorption of energy of impacts without directly transferring them to the wheel hoop, thus preventing, in efficient way the cracking of wheels. Tests are done in higher temperature160 degrees Celsius and no breakage or nipping observed.
Another characteristic of the "FLATSOVER Wheel and Tire Protection System" is the strong adherence of the product to the wheel hoop. If a vehicle needs to leave the risk site, the product will not lose the contact with the hoop of the wheel and will provide conditions for vehicle to transfer the torque to the wheel, avoiding losses of power.
It does not diminish the contact with the pavement. If the vehicle loses the tire in a risk situation, the "FLATSOVER Wheel and Tire Protection System" will enter in contact with the paving of the road and will provide enough adherence to enable the vehicle to run. Due to its composition resilience and of high tenacity, it is adequate for all types of paving where a conventional tire would work.
Wheel Balancing: As the "KANASFLATS OVER Wheel and Tire Protection System", has an excellent locking system to the hoop of the wheel, it allows a balancing without compromising the set wheel-tire. This prevents the necessity of frequent wheel balancing, in comparison to similar products that are not so adherent to the hoop of the wheel.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Suspensions
KANAS is authorized commercial agent of dobinsons in middle east.
Dobinsons high-performance coil, shock absorbers and leaf springs for most types of passenger, 4WD commercial and heavy-duty vehicles.
Let us know your type of vehicle and we provide you the best solution fits your requirement for SUVs, medium and heavy duty trucks and buses.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Brake System
KANAS will replace OEM brake system with Alcon BIG brake kit.
The kit was developed and specified for vehicles up to 5,500 KG (12,100 Pounds) in mind although it is regularly used on heavier vehicles with a subsequent drop-off in performance as would be expected.
Brake pad and disc life significantly exceed the life of OE systems used on an armored vehicle. Actual wear rate of pads will vary by weight and type of use but will be far lower than any system relying upon the OE caliper by virtue of the 74% increase in pad area and significantly lower operating temperatures of the system.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Heavy Duty Door Hinges
Heavy-duty door hinges are installed on all doors to enhance the protection and weight load capability. These reinforced heavy-duty door hinges also help to sustain the alignment of the doors for operational lifetime.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Heavy Duty Winch
An electric winch is the ultimate recovery accessory, providing heavy duty recovery capability when the unexpected occurs.
It is designed to perform in the most strenuous conditions imaginable irrespective of the environmental conditions.
When choosing a winch, consideration should be given to the weight of the vehicle and the expected usage. The capacity of the winch should be at least one and a half times the weight of the vehicle, and consideration should also be given to wire rope retrieval speed.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Flag Pole
Car flagpoles for official cars used by Diplomats, Embassies, UN, EU, Governments, Classic car owners and other people all around the world who want a exclusive car flag pole for special purpose use in VIP vehicles.
Diplomatic car flags used by Embassies, UN, Governments, classic car owners and people all around the world who want an exclusive fixed car flagpole in polished stainless steel.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
4-5-6 points seat belts
Whether you want to buy a 4 point, 5 point harness or 6 point seat belt restraining system or would like to buy motor racing lap belts, harness, sub-belt or accessories individually, KANAS is your source out of UAE.
All of our seat belts are safety rated, so you can rest assured that you are well protected.
Our 4-5-6 point seat belts are universal to all makes and model of vehicles.
These four point seat belts are perfect for the middle seat position of bench seats providing shoulder harness restraints. For bucket seat installations, this seat belt is best used with bucket seats with adjustable headrest.
Seat belts work in either driver, passenger or middle position in your car, truck or van.
VELM was founded in 1961 and since then has been involved in automotive, spare-parts and car safety. The headquarter is based in Agrate Brianza (ca. 30 km north of Milan), while the daughter company, founded in 1990 is based in Turnov (ca. 100 km north of Prague ; Czech Rep.).
Today VELM’s core business is “manufacturer of seat belts” for: special vehicles, seat industry commercial and military vehicles, integrated seat belts for driver and passengers seats in busses, coaches, lorries, forklift, trucks as well as in heavy duty vehicles, earth moving and agricultural vehicles.VELM is synonym of SAFETY based on almost 40 years of experience; today exports to more than 30 countries world-wide. Thanks to the cooperation with Autoliv Group, a leading company of the car industry, VELM has access to a much wider product range of components to built its safety systems.
QUALITY, FLEXIBILITY And RELIABILITY as well as development of “tailor made” belts, also for small and medium size demands, are the highest priority. VELM places great emphasis on direct contact and close cooperation with its clients to find fast and uncomplicated solutions for the development of new systems and handles orders in a flexible and reliable manner.
VELM can accomplish tasks in short time, paying attention to customers wishes and ideas, analysing the application environment and developing in close cooperation an individual restrain system that is secure for the intended use, thus providing projects from 3d technical development to homologations accomplishments.In the field of R&D (research & development) makes also use of the innovations lead from Autoliv, who has major research and development engineering centres world-wide.
KANAS is the authorised commercial agent and representative of VELM in UAE.
Products are subjected to the strictest material and function tests during development stage and prior to serial application. Among these tests are: proof of mechanical stability, extended endurance tests, climatic and corrosion tests.
VELM ensures consistent good quality by regular testing of parts from the current production, CoP (Conformity of Production). Spot inspections in the goods inwards guarantee that only parts of perfect quality will enter the production. Manufacturing is continuously monitored and the process is completed with a 100% final check. VELM quality system is based on ISO 9001-2009 and on CoP surveillance by the homologation institute. VELM can thereby ensure utmost quality and reliability and by all restrain system is able to achieve conformity according to any international standard, such as EC, FMVSS, SAE, ISO etc.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Roof Racks
Aluminum strong roof racks available specially designed for armored vehicles need.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Bumpers/Roll Bars
Heavy-duty Front and Rear bumpers with Tire carrier. Roll bars are also available on demand.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Special Tool Kits
KANAS can provide special toolkits. We can also supply tools other than below pictures that help you take care of your issues on your route.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Pictures Gallery
Get a quote
We have special rates for armoring companies internationally for armored vehicle components.
You are requested to send your requirement with specs and quantities you are looking for
KANAS will supply you competitive prices with good quality products.
We supply spare parts as well to support our clients.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our contact us form.
Warranty
All items in this segment are under manufacturers standard warranties.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our
contact us form.
Terms and Conditions
Please forward us your requirements and we’ll supply you quotations with product specifications. Terms and conditions are mentioned on our quotes. All payments are required in advance wire transfer to KANAS bank account.
If you have a question which has not been answered here, or you have other inquiries please email at info@kanasgroup.com or use our
contact us form.